Car blocker "Perseus-24M1"
The device is designed to ensure the safety of especially important persons (VIPs), convoys, and especially important objects in the face of the threat of terrorist attacks against them using remote-controlled explosive devices with radio fuses.
The device can also be used to block cellular, trunk and other types of communications in squares, stadiums, transport hubs, combat UAVs (blocking control lines), etc.
Despite the wide range of operating frequencies (20...2700 MHz and optionally 3300...3700 MHz), the device uses only two ultra-wideband radiating antennas with a circular radiation pattern.
The device is manufactured in a single housing and is placed inside the vehicle. Power is supplied from the car's on-board network 12 V or 24 V. The device is controlled from the interior using a wired remote control.
Thanks to the use of OptiJam technology, the emitted signal of the device has a high spectral density, which significantly increases the radius of suppression of radio fuses, while at the same time allowing to maintain a level of radio emission that is safe for personnel.
The device has a built-in automatic diagnostic system that monitors the performance of all components and blocks. In the event of an emergency, sound and light alarm signals are displayed on the control panel indicating the faulty unit or assembly. If the antenna cables break or the antennas break down, they are switched off automatically to prevent failure of the corresponding amplification units.
Distinctive Features
- Automotive broadband radio fuses blocker
- Powered by standard vehicle on-board power supply
- Application of Opti Jam technology
- Built-in digital diagnostic system with fault alarm
- High integrated radiation power (200 W)
- Operation in the promising frequency range 5G NR FR1 (optional)
- Just two ultra-wideband antennas provide radiation over the entire operating frequency range
Technical characteristics:Car blocker "Perseus-24M1"
| Frequency range | 20…2700; 3300…3700 (optional) MHz |
| Total output power | 200W |
| Nutrition | vehicle on-board network 12/24 V |
| Time of continuous operation from the network | without limitation |
| Power consumption in emission mode | 660 W |
| Operating temperature range | −40…+60 °С |
| Dimensions | 497 × 340 × 96 mm |
| Weight | up to 18 kg |
| Package | plywood box, 2 shipping places, gross weight 40 kg |
The total output power is measured into a 50 Ohm load. Power consumption is indicated at I=50 A, U=13.2 V. The design complies with MIL STD 810F and IP 66 standards. Dimensions and weight of the device are given without AFU. The device is certified for compliance with the requirements of GOST R 12.2.006.0 and SanPiN 2.2.4.1191-03/2.1.2.1002-00. Production certified for compliance with ISO 9001 standard
Delivery methods: delivery to the address, delivery by transport companies. We deliver throughout Russia. Delivery prices are calculated by sales managers. Delivery times are calculated depending on the equipment supplied and the conditions specified in the contract. Payment methods: We accept non-cash payments including VAT.
