Stationary blocker "Perseus-30"
The device is designed to protect stationary objects under the threat of terrorist acts against them using remote-controlled explosive devices with radio fuses.
The device can also be used to block cellular, trunk and other types of communications.
The device is designed for power supply from a stationary network of 230 V, 50 Hz. Due to the use of the “Opti Jam” system to organize the distribution of spectral density by power over the operating frequency range, the efficiency of the device is significantly increased.
The device body is designed for operation in open spaces, has increased heat dissipation and protection from external influences at the IP66 level.
Despite the wide range of operating frequencies (20...2750 MHz and optionally 3300...3700 MHz), the device uses only two ultra-wideband radiating antennas with a circular radiation pattern.
Distinctive Features
- Stationary broadband radio fuses blocker with barrage interference;
- Powered by a stationary AC network 230 W, 50 Hz;
- Application of Opti Jam technology;
- Built-in digital diagnostic system with fault alarm;
- High integrated radiation power (200 W);
- Operating in the advanced 5G NR FR1 frequency range (optional)
- Just two ultra-wideband antennas provide radiation over the entire operating frequency range;
- The network adapter with the control panel is located separately from the main unit in a stationary electrical cabinet, which reduces the thermal load on the main unit and simplifies the operation of the device.
Technical characteristics: Stationary blocker "Perseus-30"
| Frequency range | 20…2750; 3300…3700 (optional) MHz |
| Total output power | 200W |
| Nutrition | AC mains 230V, 50 Hz |
| Time of continuous operation from the network | unlimited |
| Power supply from fixed network | 230 V, 50 Hz |
| Operating temperature range | −40…+50 °С |
| Dimensions | 497 × 340 × 96 mm |
| Weight | up to 18 kg |
| Package | plywood box, 2 shipping places, gross weight 88 kg |
The total output power is measured into a 50 Ohm load. The design complies with IP 66 standards. The device is certified for compliance with the requirements of GOST R 12.2.006.0 and SanPiN 2.2.4.1191-03/2.1.2.1002-00. Production is certified to comply with the ISO 9001 standard.
Delivery methods: delivery to the address, delivery by transport companies. We deliver throughout Russia. Delivery prices are calculated by sales managers. Delivery times are calculated depending on the equipment supplied and the conditions specified in the contract. Payment methods: We accept non-cash payments including VAT.
